Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tempe
Gate installation in Tempe typically runs $2,800-$7,500 for a residential automated driveway gate, depending on whether you’re replacing an existing manual gate or starting from bare posts. Most South Tempe and North Tempe projects we quote are completed within two to three weeks of written approval, with automation and safety integration scheduled after the gate frame is hung and plumbed. Call (520) 482-3109 for a free written estimate - we dispatch from our Phoenix office and serve Tempe neighborhoods daily.
We’ve been installing and automating gates in Tempe since 2014, and the pattern is consistent: the gate itself is rarely the problem. It’s what got left out during the original build - the conduit run, the safety photocell pre-wire, the post footing rated for operator torque - that shows up five or ten years later as a dead operator, a sagging leaf, or a compliance citation. Our Gate Installation team documents every specification in writing before any metal gets cut.
Why Vance Gate Repair Gilbert Is Tempe’s Preferred Gate Installation Company
Tempe homeowners know the difference between a verbal estimate and a written scope. We operate under The Haven Standard: a written price before work starts, a documented photo record of every adjustment and part number, and the 365-Day Done Right Promise covering all completed work. No expiration within that window, no argument, no fee.
Our technicians are background-checked, uniformed, and named before arrival - license number provided, photo sent to your phone. We’ve completed 22,000+ gate repairs and installations since 2014, every one with a written price agreed upfront and a photographic record left with the homeowner. That documentation habit started with Adrian Vance’s commercial access-control work and now applies to every residential driveway gate we touch in Tempe.
A live person answers our phone 24 hours a day, seven days a week. No voicemail loop, no callback queue, no automated attendant at any hour. If your gate is stuck open after a monsoon surge or you’re facing an HOA compliance deadline in Warner Ranch or the Kiwanis Park area, you’ll reach someone who can dispatch.
We also offer free second opinions on any written estimate from another company. Bring the paperwork and we’ll review it at no cost.
Our Gate Installation Services in Tempe
Swing Gate Installation
Swing gates remain the most common type we install in Tempe, from restored wrought-iron originals in North Tempe’s ASU-adjacent rental belt to new tubular steel designs in South Tempe’s master-planned communities. The critical detail is the post footing: a manual swing gate that operated fine for thirty years will tear a 1970s-era concrete footing apart once an operator adds torque. We pour new footings to spec, hang the gate plumb, and only then spec the operator arm geometry. Most single-leaf swing gate installations in Tempe run $2,800-$4,200 with automation; double-leaf systems run $4,500-$6,800 depending on access-control integration.
Driveway Gate Installation
Driveway gates in Tempe face a specific stress profile: 110°F+ heat cycling, haboob dust infiltration, and caliche soil that shifts with seasonal moisture changes. We see too many installations where the gate was built for appearance and the operator was added as an afterthought. Our driveway gate installations include Schedule 40 conduit runs for all low-voltage wiring, UL 325-compliant safety photocells or edge sensors, and operator housings rated for Arizona’s UV and dust exposure. A typical automated driveway gate installation in Tempe - new posts, frame, operator, and safety integration - runs $4,200-$7,500.
Sliding Gate Installation
Sliding gates make sense on Tempe properties with steep driveways or limited swing clearance, particularly in hillside sections of South Tempe and along the McClintock corridor. The track system is where most local installations fail: nylon roller wheels deform in sustained heat, and haboob dust packs into the rack-and-pinion geometry. We spec steel or UHMW rollers rated for high-temp operation, install covered track where possible, and always include a manual release mechanism accessible from both sides of the gate. Sliding gate installations in Tempe typically run $5,200-$8,500 with automation, depending on track length and access-control features.
Pedestrian Gate Installation
Pedestrian gates in Tempe serve two distinct needs: pool-barrier compliance and property access. Arizona pool-barrier law (ARS 36-1681) mandates self-closing, self-latching gates on all pool enclosures, and Tempe code enforcement actively cites violations. The UV intensity here degrades spring-loaded latch hardware faster than manufacturers rate it, so we spec marine-grade stainless latches and adjustable self-closing hinges on every pool gate we install. Pedestrian gate installations in Tempe run $850-$2,200 depending on automation, access control, and compliance features.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Tempe
We install and automate gates with operators from nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Tempe customers, this means we can match whatever motor is already on the property rather than steering you toward replacement. We stock common LiftMaster and FAAC parts locally for fast turnaround on South Tempe’s aging HOA automation, and we carry Mighty Mule and Elite hardware for the rental-gate retrofits common north of campus. Every installation includes a documented wiring diagram and photographed limit-switch settings under Haven Standard Clause 4.
Common Gate Installation Problems We See in Tempe Homes
- Builder-grade operators without conduit runs. South Tempe HOA gates from the 1990s-2000s boom were often wired with direct-bury low-voltage cable that cracks its sheath after a decade of 110°F+ heat cycling. The operator dies, the gate goes manual, and the homeowner discovers there’s no conduit to pull new wire through.
- Manual gates retrofitted to automatic without structural review. Adding a LiftMaster or Mighty Mule arm to a 1970s iron swing gate on a cracked caliche footing accelerates sag and can tear the post out completely. We inspect and replace footings before hanging automation.
- Missing UL 325 entrapment protection. Gates automated after initial installation often lack safety photocells or edge sensors - a liability issue and, in Tempe’s active code-enforcement environment, a citation risk. We add compliant protection on every automation project.
- Pool gates with degraded latch hardware. The spring-loaded self-latching mechanisms required by ARS 36-1681 fail prematurely in Tempe’s UV intensity. We see this on 1980s and 1990s pool gates throughout the McClintock and Rural Road corridors.
Pricing for Gate Installation in Tempe, AZ
| Service | Typical Range in Tempe |
|---|---|
| Single-leaf swing gate (manual) | $1,800 - $3,200 |
| Single-leaf swing gate (automated) | $2,800 - $4,200 |
| Double-leaf swing gate (automated) | $4,500 - $6,800 |
| Sliding driveway gate (automated) | $5,200 - $8,500 |
| Pedestrian gate (pool compliance) | $850 - $2,200 |
| Operator-only replacement (existing gate) | $1,400 - $2,800 |
| Conduit run and rewire (no gate work) | $800 - $1,600 |
These ranges reflect what we quote in Tempe’s market. Final price depends on gate material (wrought iron, tubular steel, aluminum), access-control features (keypad, telephone entry, remote), and whether the existing posts and footings can carry automation torque. We deliver a written, itemized price before any work starts - no call-for-a-quote, no invoice surprise. Free estimates include site measurement, soil condition check, and a photo log of what we found.
We were called to a 2003-built HOA home near Warner Ranch in South Tempe where the builder had installed a LiftMaster swing gate operator on a tubular steel driveway gate, but the original pour had no conduit run - just direct-bury low-voltage wire that had finally failed after twenty summers. Our tech pulled new wire through Schedule 40 conduit, reset the post footing on the passenger side, and added a safety photocell pair because the gate had been operating without entrapment protection. The gate has run clean through two monsoon seasons since, and we now quote conduit runs on every South Tempe gate installation we touch.
We Also Serve Cities Near Tempe
Our crews work daily across the East Valley. If you’re in Tempe or nearby Mesa, Chandler, Gilbert, or Scottsdale, we offer the same written pricing, documented photo records, and 365-Day Done Right Promise. Dispatch and scheduling are coordinated from our Phoenix office.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tempe
You usually need a new operator and a wiring upgrade, not a new gate. The tubular steel or aluminum gate frame in South Tempe’s 1990s-2000s HOAs typically outlasts the builder-grade operator, but the direct-bury low-voltage wire and lack of conduit run means every replacement operator eventually fails the same way. We quote the operator, a Schedule 40 conduit pull, and UL 325 safety devices as a single scope. Call (520) 482-3109 for a free estimate - we’ll inspect the post footing and hinge condition while we’re there.
We can often automate it if the hinge post and footing are sound. The iron itself usually holds up; it’s the 1970s-80s concrete footing, cracked by caliche shift, that can’t handle operator torque. We replace the footing, hang the gate plumb, and spec an operator arm geometry that matches the leaf weight. Many North Tempe landlords choose this route over full replacement. We’ll give you a written price for both options so you can compare.
Haboob season. The fine caliche and silica dust carried through the Salt River valley corridor packs into motor housings, limit switches, and track systems, causing jammed or miscalibrated operators in the weeks after major storms. Sustained 110°F+ heat also accelerates expansion-related warping and degrades nylon components. We spec sealed operator housings, covered track where possible, and post-monsoon maintenance checks for automated gates in Tempe. The failure is predictable; the prevention is straightforward.
Yes. Arizona pool-barrier law (ARS 36-1681) applies to any pool enclosure gate, and Tempe code enforcement actively cites violations. Even a like-for-like gate replacement must maintain self-closing and self-latching function. We spec marine-grade stainless hardware rated for Tempe’s UV intensity, which degrades standard spring latches faster than manufacturers’ ratings predict. The gate, latch, and hinge assembly are treated as a compliance system, not separate parts.
Ask for four things in writing: a Schedule 40 conduit run for all low-voltage wiring, UL 325-compliant entrapment protection (photocells or edge sensors), an operator housing rated for Arizona’s dust and heat exposure, and a documented wiring diagram with photographed limit-switch settings left with you at completion. These are standard on every Vance installation, but they’re frequently omitted by builders and low-bid contractors. Under Haven Standard Clause 1, you’ll have the written price before work starts; under Clause 4, you’ll have the photo record when we leave.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Tempe since 2014.